The new Sealant Equipment and Engineering model 2200-806 high volume heated tip-seal material dispense valve is designed to deliver low to high viscosity heated materials at a high flow rate. The large 3/4 inch diameter orifice dispenses large volumes at a slow velocity for proper fill rates. The zero-cavity nozzle design eliminates dripping after shut-off. The material chamber has 120v heaters and sensor to control temperatures up to 350degF. The nozzle has a separate heater and sensor to prevent cold material starts due to loss of temperature. The standard model includes two operator handles and an electric trigger switch to control the start-stop flow of heated material. The carbide and wear resistant components and high-temperature seals are designed to handle heated materials with abrasive fillers. In addition, the design allows multiple Tip-Seal valves to be ganged together. Applications include filling lighting ballasts, packaging fluid materials, roller coating filling and large potting or coating operations.