Innovative Pressure Technologies (IPT) has released its Floating ball valves onto the market. The valves feature a 2-way floating ball design that is suitable for most on-off process applications up to 10,000psi. Adjustable packing, and a blow out resistant stem with stem bearing, promise high cycle life and low torque operation. Independently adjustable spring loaded seats provide long valve life and repeatable, leak-tight performance in critical service process isolation, sour gas, hydraulic process fluid and automated service with actuator applications, among others. Standard mounting configurations include panel mounting with a panel nut, two bolts through the panel into the valve body, or bolted through the valve body mounting holes with a dual bolt pattern. Standard available port sizes are 3/16in, 1/4in, 3/81/4 or 1/2in. Standard connections include Male of Female NPT, M/P Cone and Thread, and H/P Cone and Thread. Typical materials of construction include 316 cold worked stainless steel, glass-filled Teflon packing, glass-filled PEEK seats and Viton seals, with other materials available upon request.