Spool valve NG4 with enhanced corrosion protection

The proven flange spool valves for the modular valve construction have been extended with execution for use in very corrosive environments. In the “K8” version, all external metal parts of the valve are completely coated with zinc-nickel, which results in significantly higher corrosion protection (800 h in the salt spray test according to ISO 9227). The valve can switch volumes up to 30 l/min with up to 350 bar and is available as a 2-way or 3-way function.

An optional detent function enables valve actuation with a short electrical impulse, which greatly reduces energy consumption. A low-leakage version is available for applications where the lowest possible leakage is required. An “Economy” version in a greatly reduced size was also created, which can be used in tight installation spaces. The direct operated valve of nominal size NG4 is available as a 4/2-way and 4/3-way function with the designation WDxFA04_K8. It controls the direction of flow and thus in most cases the direction of movement or rotation of hydraulic actuators. Due to the high corrosion protection, it is suitable for use in harsh weather conditions.

Previous articleMAN Energy Solutions expands power plant in Suriname
Next articleHistoric investment decision for the transport of CO2